Zenith Therm-X Series, Руководство пользователя

Страница: 15 / 38

14
IFU-001 Rev. 8
Quick Picks and Favorites
Your Therm-X will come preloaded with 3 commonly-prescribed therapies.
•
Quick Pick 1, 30 minute treatment, 30
minute
rest, 40°F, lite intermittent
compression, continuous treatment.
•
Quick Pick 2, 30 minute treatment, 30
minute rest, 40°F, low intermittent
compression, continuous treatment.
•
Quick Pick 3, 30 minute treatment, 30
minute rest, 40°F, medium intermittent
compression, continuous treatment.
You may add a favorite program quick pick. This allows
you to program a favorite treatment for quicker
selection when treating multiple patients. The
software will allow you to program one treatment
along with DVT on your Home model. You can
reprogram the Favorite treatment by selecting the
Favorite treatment and pressing “Reset Favorite.”
Continuous Treatment
You may select the “ Continuous ” button to set the
duration of treatment (10-40 minutes) and the
duration of rest (30-60 minutes). A continuous
treatment will alternate between active and resting
treatment continuously until the Stop icon or Pause
icon is pressed. This treatment will apply 5 mm Hg
compression to the thermal garment during the rest
timer.
In you have already selected a temperature lower than 40°F or higher than 107°F, or a compression
level of ‘High’ while programming a ‘Continuous’ treatment, the software will automatica lly adjust the
temperature and compression to a more conservative choice; 40°F for a cold cycle, 107°F for a warm
cycle, and Medium pressure. A continuous cycle cannot be run outside of these parameters.