background image

P/N : 3828VA0432J (MP03AA) 

LG ELECTRONICS CORPORATION 

ZENITH Projection TV Limited Warranty - USA

LG will repair or replace your product, at LG’s option, if it proves to be defective in material or workmanship

under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of

Purchase") of original consumer purchase of the product.  This warranty is good only to the original purchaser of

the product and effective only when used in the United States, excluding U.S. Territories.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN

DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG WILL NOT BE LIABLE FOR ANY

INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN

IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST

REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE

WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.

Some states do not allow the exclusion or

limitation of incidental or consequential damages or limitation on how long an implied warranty lasts, so the

above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may

also have other rights that may vary from state to state.

THIS LIMITED WARRANTY DOES NOT APPLY TO:

1.Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and 

2.Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship. 

3. Therefore, the cost of repair or replacement of such a defective product shall be borne by the

consumer.

CUSTOMER INTER-ACTIVE CENTER NUMBERS:

LG CUSTOMER INTERACTIVE CENTER

201 JAMES RECORD ROAD HUNTSVILLE

ALABAMA 35824

WARRANTY PERIOD:

LABOR: One Year

from the Date of Purchase. 

Parts: One Year

from the Date of Purchase. 

CRT Picture Tubes: 2 Years

from the Date of

Purchase. 

* Parts replaced are warranted for the remaining

portion of the original warranty period.

HOW SERVICE IS HANDLED

In-Home Service: 

Please retain dealer’s dated bill of sale

or delivery ticket as evidence of the Date of Purchase for

proof of warranty, and submit a copy of the bill of sale to

the service person at the time warranty service is provided. 

Please call 1-877-9Zenith (1-877-993-6484) to locate

your nearest LG Authorized Service Center. 

Replacement parts may be new or factory remanufactured.

Call 1-877-9Zenith  (1-877-993-6484) (24 hours a day,

365 days per year) and select an appropriate option

from the menu. 

Or visit our website at http://www.zenithservice.com

For nearest Authorized Service Center,

Where to buy, Product Assistance, or

Customer Assistance

Содержание R50W46









































Отзывы: