PV154 - 923-03493
10
P60W26 - SERVICING
USER MENUS
USER MENUS
APC (AUTO PICTURE CONTROL)
APC is used to set the Monitor for the best picture
appearance. Press the apc button. Use the APC or volume
buttons to select the picture appearance setup. APC is
not available in RGB or PIP mode.
Each press of vol buttons selects the menu option.
Available options are select CLEAR, SOFT or USER. User
refers to manual adjustments made to the picture menu
options.
DRP (DIGITAL REALITY PICTURE)
DRP improves image outlines in dark screens. This feature
works in both video and component 480i modes. Use
the up/down button to select DRP and then press the
volume up button. Use the up/down button to select
CLEAR or SOFT. Press the enter button to exit.
APC
DRP
CONTRAST
100
BRIGHTNESS
50
COLOR
50
TINT
0
SHARPNESS
50
CLEAR
SOFT
PICTURE
DRP
PICTURE SETTINGS
Adjusts BRIGHTNESS, COLOR, TINT, and SHARPNESS in the
same way. Use the volume buttons to make appropriate
adjustments and then press the enter button. Use the
up/down buttons to select other menu options.
APC
DRP
CONTRAST
100
BRIGHTNESS
50
COLOR
50
TINT
0
SHARPNESS
50
PICTURE
CONTRAST
100
Note: PIP picture settings are not adjustable.
MENU LANGUAGE SETUP
Press the menu button and then use the volume up/
down buttons to select the SPECIAL menu. Use the volume
up/down button to select LANGUAGE and then press the
volume up button. Use the volume up/down button to
select the desired language. Press the enter button to
exit.
LANGUAGE
ARC
SCREEN
TRANSPARENCY
PIP
SET ID
COLOR TEMP.
ENGLISH
ESPAÑOL
FRANÇAIS
SPECIAL
ENGLISH
SLEEP TIMER
Sleep Timer turns the set off after a preset time expires.
Use the sleep button to set a sleep time. Each time you
press the sleep button, the time setting time changes as
follows:
---
10
20
3 0
120
180
24 0
90
6 0
30
SLEEP
To cancel sleep time setting, press the sleep or volume
up/down button repeatedly to select. SLEEP 1 will be
displayed one minute before the set is due to turn off.
Tips
• When the sleep time you want is displayed on the
screen, don’t press the sleep button. After 20 sec-
onds, the screen display disappears and sleep time
is set.
• To check remaining sleep time after setting, press
the sleep or enter button just once.
• If the set is turned off after setting the sleep timer,
the setting is erased. The sleep timer will then have
to be set again.
STILL FUNCTION
Use with the A/V or COMPONENT video input sources.
Press the freeze button. The image displayed is frozen
(stilled). In PIP mode, the sub (inset) picture is frozen.
To return to normal viewing, press the freeze button
again. This feature isn’t available for RGB input source.
