Zenith P42W24P, Инструкция по установке и эксплуатации, Страница: 6 / 36

6
Monitor Controls
Connection Options
VOL. MENU
INPUT
SELECT
ON/OFF
Main Power Button
INPUT SELECT Button
VOLUME ( F , G ) Buttons
Power Standby Indicator
Illuminates red in standby mode,
Illuminates green when the
Monitor is turned on
Remote Control Sensor
MENU Button
D
,
E
Buttons
R
( ) ( ) ( ) ( )
L
REMOTE
CONTROL
RGB2 INPUT
(DIGITAL RGB INPUT)
RGB1 INPUT
(PC/DTV INPUT)
RGB1 OUTPUT
(PC/DTV OUTPUT)
COMPONENT
(DVD/DTV INPUT)
RS-232C INPUT
(CONTROL/SERVICE)
EXTERNAL SPEAKER
LOCK
CONTROL
ON/ OFF
Y P
B
P
R
(MONO) R AUDIO L R AUDIO L
S-VIDEO VIDEO INPUT AC INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT
1 2 3
Front Panel Controls
Back Connections Panel
4 5 8
1. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
* For further information, refer to ‘Speaker & Speaker Stand’
manual.
2. RS-232C INPUT (CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
3. AUDIO INPUT/RGB1 INPUT (PC/DTV INPUT)/
RGB2 INPUT (DIGITAL RGB INPUT) JACKS
Connect the monitor output connector of a PC to the appro-
priate input port.
4. RGB1 OUTPUT (PC/DTV OUTPUT) JACKS
You can watch the RGB1 signal on another monitor, connect
RGB1 OUTPUT (PC/DTV OUTPUT) to another monitor’s
PC input port. Note: In standby mode, RGB1 output does not
work.
5. CONTROL LOCK Switch
REMOTE CONTROL
When “CONTROL LOCK” is set to “ON”, the Monitor is oper-
able by the external control device.
6. COMPONENT (DVD/DTV INPUT)/AUDIO INPUT JACKS
7. AUDIO/VIDEO INPUT JACKS
Connect audio/video out from external equipment to these
jacks.
S-VIDEO INPUTS (S-VIDEO)
Connect video out from an S-VIDEO VCR to the S-VIDEO
input.
8. POWER CORD SOCKET
This Monitor operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to operate
the Monitor on DC power.
6 7