Zenith P42W24P, Инструкция по установке и эксплуатации, Страница: 28 / 36

28
21. Red Adjustment (Command2:v)
G
To adjust Red in Color Temperature.
Transmission
Data Min: 0 ~ Max: 64
* Refer to ‘Real data mapping 2’ as shown below.
[k][v][ ][Set ID][ ][Data][Cr]
Acknowledgement
[v][ ][Set ID][ ][OK][Data][x]
20. Color Temperature (Command2:u)
G
To adjust Color Temperature.
You can also adjust ACC in the Special menu.
Transmission
Data 0: Normal 1: Cool 2: Warm 3: User
[k][u][ ][Set ID][ ][Data][Cr]
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
18. Bass (Command2:s)
G
To adjust Bass.
You can also adjust Bass in the Sound menu.
Transmission
Data Min: 0 ~ Max: 64
* Refer to ‘Real data mapping1’. See page 27.
[k][s][ ][Set ID][ ][Data][Cr]
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
19. Balance (Command2:t)
G
To adjust Balance.
You can also adjust Balance in the Sound menu.
Transmission
Data Min: 0 ~ Max: 64
* Refer to ‘Real data mapping1’. See page 27.
[k][t][ ][Set ID][ ][Data][Cr]
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
17. Treble (Command2:r)
G
To adjust Treble.
You can also adjust Treble in the Sound menu.
Transmission
Data Min: 0 ~ Max: 64
* Refer to ‘Real data mapping1’. See page 27.
[k][r][ ][Set ID][ ][Data][Cr]
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
16. PIP Position (Command2:q)
G
To select sub picture position for PIP.
You can also adjust the sub picture position using PIP
POSITION button on the remote control or in the Screen
menu.
Transmission
Data 0: Right down on screen
1: Left down on screen
2: Left up on screen
3: Right up on screen
[k][q][ ][Set ID][ ][Data][Cr]
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
* Real data mapping 2
0 : -10
5 : -9
A : -8
2D: -1
32: 0
37: +1
5F: +9
64: +10
15. PIP Sound Select (Command2:p)
G
To select main or sub sound for PIP/Twin picture.
You can also adjust main or sub sound for PIP/Twin pic-
ture using the PIP SOUND button on the remote control
or in the Screen menu.
Transmission
[k][p][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0: Main image sound
1: Sub image sound
[p][ ][Set ID][ ][OK][Data][x]