Zenith L13V36, Инструкция по установке, настройке и эксплуатации

Страница: 16 / 52

Antenna/Cable Connections
16
206-3916
- For optimum picture quality, adjust antenna direction.
●
Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below.
(Use the correct type of antenna cable for the type of wall antenna jack.)
Wall Connection Jack Apartment Buildings
Antenna jack
Bronze Wire
Turn clockwise to
tighten.
Antenna
Converter
300
Ω
Flat Wire
75
Ω
Round Cable
●
This type of antenna is commonly used in single family dwellings.
UHF
Antenna
VHF Antenna
Antenna jack
Bronze Wire
Turn clockwise to
tighten.
Antenna
Converter
300
Ω
Flat Wire
75
Ω
Round Cable
- If you have a 75
Ω
round cable, insert the bronze wire and then tighten the connection
nut. If you have a 300
Ω
flat wire, connect the twisted wire to the antenna converter and
then connect the converter to the antenna jack on the TV.
- When using 75
Ω
round cable, do not bend the bronze wire. It may cause poor picture
quality.
- In poor signal areas, to get better
picture quality, install the antenna as
shown to the right.
- If antenna is split for two TVs, use
signal splitter for connection.
signal
Amplifier
UHF VHF
Single Family Home
Connecting to an Inside
Connecting to an Inside
Antenna Setup
Antenna Setup
Connecting to an Outdoor
Connecting to an Outdoor
Antenna Setup
Antenna Setup
+
75
Ω
ANT IN
VIDEO IN
R L VIDEO AUDIO (MONO)
+
75
Ω
ANT IN
VIDEO IN
R L VIDEO AUDIO (MONO)
+
75
Ω
ANT IN
VIDEO IN
R L VIDEO AUDIO (MONO)