802253NZ - HT BC Residential Instructions 10.18 v3.00
Page 19 of 28
Installation Instructions
External HOT and COLD
isolation valves
(not supplied)
Tee piece
(supplied)
4.4
Model: All-In-One Mains Pressure
RED
CLEAR
BLUE
BRAIDED
USB
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT CHILLED
OUT
: Not required for AIO mains pressure HydroTap.
Note:
The tube lengths are matched to the pump performance and therefore CANNOT be lengthened
Note:
the hoses
need to have a
constant downward
gradient to the
Hydrotap to allow all
water to drain back
into the tanks.
Note:
- Mains hose length
is 750mm
- Plug and Cord
length is 1800mm
Position the under
sink unit close to
the outlet tap, within
reach of the hose
and cord lengths
supplied
