Zenith H19F34DT Series, Руководство по обслуживанию

Страница: 24 / 62

SR25-3828VD0171B
2-8
CL - INSTALLERS MENU
CL MODEL SERIES 34 & 36 FACTORY MENU
SECTION 2
FACTORY MENU DESCRIPTION FOR SERIES 34 & 36
0-F FACT MENU : Use SELECT UP and DOWN Keys to select
item 00, the Factory Mode. The Factory uses this item
when the module is being tested. It has two positions: 0
and 1. In the field, this item should always be left off
(Zero is off).
When the Factory Menu is on, the AC Power On feature is
always enabled regardless of the setting of AC ON in the
Installer’s Menu.
The TV set will automatically come on when AC is ap-
plied. Use the remote to reenter the Factory Menu to
turn the Factory Menu off. The Factory Mode may also be
turned off by setting the clock or runing the Auto Pro-
gram feature in the customer Set Up menu.
0IMCRMI039A 1.83 01
05/03/03 TE = 10110000
01-F PRESET PX
Microcontroller
part number
Program
Revision Font
Revision
Build Date
TE Status
1-F PRESET PX: Stores the video customer menu adjust-
ments in the nonvolatile memory of the EAROM. Settings
for Contrast, Brightness, Color, Tint and Sharpness are
stored in this manner. 0 is custom and 1 is preset stored.
2-F PRESET AX: Stores customer Audio menu adjustments
in the nonvolatile memory of the EAROM. Settings for
Bass, Treble, Balance, Audio mode, Front Surr and
SoundRite are stored in this manner. 0 is custom and 1 is
preset stored.
3-F VERT P0S: Moves On-Screen Displays vertically. The
Range is from 0-30. This adjustment is generally set at
15.
4-F H0RZ POS: Moves On-Screen Displays horizontally.
Range is from 1-45.
5-F RF DELAY ADJ : (RF automatic Gain Control) Range is
from 0-127. 35 is a general setting. Tune in weakest
available channel and adjust for a snow-free picture.
6-F VIF VCO ADJ:
(PIF Voltage Oscillator). Range is 0-
63.
7-F VIF VOUT GAIN: VIF video detector output level ad-
justment at pin 58. Range is 0-7, typical value is 2.
8-F AFT DEFEAT: AFT OUT On/Off; 0=AFT on, 1=DEFEAT.
9-F VIF DEFEAT:
VIF AGC GAIN Normal/Minimum, Switch
0=AGC Function & 1=Defeat (Min Gain).
10-F VOL CLIPPING: Selects the volume clipping mode.
11-F PRE AUXINPUT:
Prescale for auxiliary input signals.
12-F PRE AUDDEMOD:
Prescale for the demodulated BTSC
signal.
13-F SPAT STREGHT: Spatial effect strength.
14-F SPAT MODE: Spatial effect Mode.
15-F SPAT GAIN:
Spatial effect high Pass GAIN.
16-F AVC: Delay time for Automatic Volume Correction.
17-F RED CUTOFF: B&W tracking adjustment. Range is 0-
254. Typical value is 70.
18-F GREEN CUTOFF
: B&W tracking adjustment. Range is
0-254. Typical value is 70.
19-F BLUE CUTOFF : B&W tracking adjustment. Range is
0-254. Typical value is 70.
20-F RED DRIVE : B&W tracking adjustment. Range is 0-
127. Typical value is 70.
21-F BLUE DRIVE
: B&W tracking adjustment. Range is 0-
127. Typical value is 70.
22-F RF S-BRIGHT : Sets adjustment range of customer
for brightness in RF Mode. Range is 0-63. A typical value
is 31.
23-F AUX B-OFFSET : (Auxiliary Brightness Offset). This
offset value is to increase and decrease brightness level
on AUX Mode with relation to RF sub-brightness.