■
Sampling Frequency
To change the Sample Frequency setting, first select the
desired digital audio output type as indicated on page 47.
If your A/V receiver or surround processor is NOT capa-
ble of handling 96kHz signals, select the 48kHz option.
When this choice is made, this unit will automatically
convert any 96kHz signals to a 48kHz output so that your
system is capable of decoding them.
If your A/V receiver or surround processor is capable of
handling 96kHz signals, select the 96kHz option. When
this choice is made, this unit will pass each type of signal
through without any further processing.
• When you are not using the player’s digital audio out-
put, don’t select any of the options.
• If an active digital audio output signal is supplied to a
receiver or other equipment without a corresponding
digital decoding capability, a very loud noise may be
produced which could permanently damage the speak-
ers.
• The DTS DVD disc sound is played back only when
the DVD player is connected to a receiver with a DTS
decoder.
Selecting Digital Audio Output (Cont’d)
48
CD
DVD
