Zenith DVB352, Руководство по обслуживанию

Страница: 55 / 71

4-3
DECK MECHANISM DISASSEMBLY
Fig. 4-3
(S7)
(S7)
(S7)
(S7)
(S8)
GEAR ASSEMBLY RACK
RUBBER DAMPER
GEAR MIDDLE
GEAR ASSEMBLY FEED
RUBBER REAR
BASE PU(OUTSERT)
RUBBER DAMPER
PICK UP ASSEMBLY GENERAL
MOTOR ASSEMBLY SPINDLE
(C7)
PICK UP
ASSEMBLY
GENERAL
GEAR ASSEMBLY FEED
GEAR MIDDLE
GAER ASSEMBLY RACK
(A)
(S5)
(B)
FRAME UP/DOWN
BASE MAIN
FRAME UP/DOWN
GEAR UP/DOWN
3. Frame Assembly Up/Down(Fig. 4-3)
1) Release Screw(S5).
3-1. PCB Assembly Junction
1)Unconnect the 5 Connectors(C5), (C6).
2)Release 2 Screws(S6).
3-2. Base Assembly Sled Damper
Assembly Main on original position(Top side)
1) Release 4 Screws(S7).
2) Disconnect the Connector(C7).
3-2-1. Gear Assembly Feed
1) Look the Locking Tab(L3) in direction of arrow.
3-2-2. Gear Assembly Middle
3-2-3. Gear Assembly Rack
1) Release the Screw(S8).
3-3. Rubber Damper
3-4. Frame Up/Down
Note