Zenith DTV1080, Руководство по эксплуатации и гарантия

Страница: 4 / 103

206-3675
3
13. Power-Cord Protection
Route power-supply cords so they are not
likely to be walked on or pinched by items
placed upon or against them, paying particu-
lar attention to cords at plugs, convenience
receptacles, and the point where they exit
from the product.
14. Outdoor Antenna Grounding
If an outside antenna or cable system is con-
nected to this product, be sure the antenna or
cable system is grounded so as to provide
some protection against voltage surges and
built-up static charges. Article 810 of the
National Electrical Code (USA), ANSI/NFPA
70, provides information on grounding of the
mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit
connection to the grounding electrodes, and
requirements for the grounding electrode.
(See Figure.1 on reverse side for an example).
15. Lightning
For added protection for this product during
a lightning storm, or when product is left
unattended and unused for long periods of
time, unplug it from the wall outlet and
disconnect antenna or cable system. This
will prevent damage to product due to
lightning and power line surges.
Antenna Lead-in Wire
Antenna Discharge Unit
NEC Section 810-20
Grounding Conductors
NEC Section 810-21
Ground Clamps
Power Service Grounding
Electrode System
NEC Art 250, Part H
Ground
Clamp
Electric Service
Equipment
Figure. 1