07
806143NZ v1.06 07.19 CW ChillTap UCCT
Installation instructions
=
=
max 43
314.00
12.00
12.00
285.00
12.00
5
326.00
A
A - KICKBOARD CUT-OUT
1.Drill 4 pilot holes Ø12 in corners
2.Finish cut-out using Jigsaw
and Keyhole or Wall Board saw
B - CABINET FLOOR
CUT-OUT
1.Drill two pilot holes Ø12
2.Finish cut-out using Jigsaw
C - CABINET FLOOR
CUT-OUT
1.Drill 4 pilot holes Ø12 in corners
2.Finish cut-out using Jigsaw
and Keyhole or Wall Board saw
60.0
0
B
C
12.00
45.00
28
4
Additional ventilation
The following instructions are critical if the vent kit, as supplied, cannot be fitted.
If the vent kit cannot be used, or for high use applications where the cupboard space temperature is 35°C
or higher, an optional Vent Tray Kit or Exhaust Fan kit may be fitted. Contact your local service centre
for more information.
• Vent tray part no. 93541NZ (optional accessory)
• Dual exhaust fan kit, part no. 93156NZ (optional accessory)
Note: Ensure that A and B are positioned
at opposite ends of the cabinet.
Vent tray
Dual exhaust fan
Fig.4
