Zenith C27F43, Инструкция по установке и эксплуатации, Гарантия

Страница: 8 / 32

Before operating your TV, make sure the following have been completed.
• Your TV is connected to an antenna or cable system: p. 23-26.
• Your TV is plugged into a standard power outlet.
Basic TV Setup and Operation
Turning the TV On/Off
When you connect the power cord, the TV switches to standby mode
and the standby indicator changes to red.
To turn the TV on from standby mode, press the TV/VIDEO, CH
D /
E
button on the set or POWER, TV/VIDEO, CH D /
E
or any
number button on the remote control.
A channel number will be displayed on the screen. The on-screen
display will disappear after a few seconds.
Press the power button again on the remote control, the TV reverts to
standby mode.
Selecting the Menu Language
1. Press the menu button and then use D /
E
button to select the
menu shown to the right.
2. Press the
G
and then use D /
E
button to select Language .
3. Use the
F
/
G
button to select the desired language.
From this point on, the menus will appear in the language selected.
4. Press the menu button to remove menu.
8
Language English
Key + lock Off
Degauss Off
Caption Off
Tilt 0
Parental + ctl
++ MOVE + {NEXT + MENU : EXIT