background image

Antenna Connections

23

Connecting an Outdoor Antenna

For the best reception, we recommend you use an outdoor antenna.
Severely weathered antennas and antenna cables can reduce the signal quality. Before making any
connections, inspect all antenna hardware. Any service center can explain the various outdoor antennas
available to you.

Connecting a CATV Cable

If you subscribe to a CATV (cable service), make the antenna connection as described below. 

1. Remove the 300 to 75 ohm adapter or the cable from the TV, if attached.
2. Connect the CATV cable (75 ohm coaxial cable) to the 75 ohm antenna jack.

300 Ohm Flat Wire
1. Connect the 300 ohm flat wire to the screws on

the 300 ohm to 75 ohm adapter.

2. Push the end of 300 ohm to 75 ohm adapter

onto the 75 ohm antenna jack. 

75 Ohm Coaxial Cable
1. Connect the 75 ohm coaxial cable directly to

the 75 ohm antenna jack. 

75 ohm
Antenna Jack

from cable TV source

Combination
VHF/UHF Antennas

300 ohm
Flat Wire

300 to 75
ohm Adapter

75 ohm
CATV Cable

75 ohm 
Antenna
Jack

75 ohm
Coaxial
Cable

75 ohm CATV Cable

300 to 75 
ohm Adapter

300 ohm Flat Wire

300 to 75 ohm 
Adapter

1.

2.

TV rear

Содержание C27F43

































Отзывы: