206-3370-A
I N S TA L L AT I O N S TA N DA R D
P A G E 5
Connect cable
to your
Entertainment
Machine.
Mini glossary
CABLE SERVICE The wire that supplies all your cable TV (CATV) stations.
Hook Up Your Cable (CATV) to the TV
Cable TV
wall jack
Cable TV
wall jack
Audio In
Video
Cable box
In
Out
RF coaxial wire (75 ohm)
RF coaxial wire (75 ohm)
3 4
output
switch
TV back panel
(expanded view)
Antenna
Cable
TV back
Audio In
Video
TV back panel
(expanded view)
Antenna
Cable
TV back
If you’re using a cable box, leave your TV on
channel 3 or 4 and use your cable box to
change channels.
Remember, when screwing RF cables onto jacks,
clockwise tightens, and counterclockwise
loosens.
If you’re using a cable box, Auto Program
(page 8) might only find the channel your
cable service is on (usually channel 3 or 4).
Don’t worry, that’s all you need!
Locate the Antenna/Cable jack on
the back of your Entertainment
Machine.
Connect the cable that runs from
the wall directly to this jack,
according to the diagram to the
right.
Remove the back of the remote
and put in two AA batteries.
Plug in your TV. Do not plug it
into a switched outlet. Your
Entertainment Machine is
designed to operate on household
current, 120-volt 60 Hertz AC do
not attempt to operate it on DC
Current.
Go to page 8 to Auto Program
your Entertainment Machine.
1
2
3
4
5
back of remote
Cable to TV
Cable with Cable Box to TV
