
Hook up your Entertainment
Machine, see diagrams at right.
Remove the back of the remote
and put in two AA batteries
ma with + and - with -.
Plug in your TV. Do not plug it
into a switched outlet.
Go to page 8 to select your
Antenna setup and page 9 to
Auto Program your Entertainment
Machine.
3368-O
I N S TA L L AT I O N S TA N DA R D
P A G E 4
Connect an
antenna
to your
Entertainment
Machine.
Hook Up Your Antenna to the TV
Mini glossary
75 OHM RF CABLE
The wire that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped nut with a wire
sticking through the middle, and it screws onto the threaded jack on the back of your TV.
300 TO 75 OHM ADAPTER
A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack. They are usually about an
inch long with two screws on one end and a round opening with a wire sticking out on the other end.
RF coaxial wire
(75 ohm)
Antenna
Antenna
Flat wire
(300 ohm)
Antenna
300/75 ohm
Adapter
TV back panel
(expanded view)
Antenna
Typical TV back
Typical TV back
If you have a 75 ohm RF cable,
then you don’t need any adapters!
Remember, when screwing RF
cables onto jacks, clockwise tight-
ens, and counterclockwise loosens.
A 300 to 75 ohm adapter is not
included with your Zenith
Entertainment Machine.
120V
60Hz
1
2
3
4
back of
remote
Flat-Wire Antenna to Adapter
Round Antenna Wire