About this Document
This document is intended for users of all version 6.0
VSP 12-Way station models (VSP-122, VSP-122P, VSP-
211-L, VSP-213-L and VSP-223-L). For further information,
see
A100K10873 VSP 12-Way Technical Manual.
Extension Number Setting
Each VSP station must have its own extension number.
To set the extension number:
1. Insert jumpers into pins J2 and J3.
2. Set the
DIP
switch corresponding to the selected
number to the
ON
position (see Figure 1).
Figure 1: DIP switch for setting VSP extension number. This example shows extension no. 2
For information on all extension number settings, see
section
7: DIP Switch Settings for Extension Numbers in
VSP 12-Way Technical Manual.
Number Label
A label strip with numbers 1 to 12 is shipped with each
station.
●
Fix the label with the relevant extension number in
the frame next to the text
Station
no
at the front of
the station
Figure 2: Fix extension number label on the upper right corner
