8
9
4
Fasten the speaker to the mounting bracket. Then remove the back plate
on the speaker.
5
1. Run an Ethernet cable through the cable gland on the back plate, and
terminate the cable to a RJ45 connector.
2. Insert the Ethernet cable into the
TKIS
Kit
Ethernet port.
The speaker must be installed using a shielded Ethernet
cable with grounding at the switch end.
6
Verify that microphone and speaker wires are correctly connected.
Speaker
+
Red
-
Yellow
Microphone
+
White
-
Black
7
1. Reattach the back plate.
To maintain the IP-66 rating on the speaker, use a tightening
torque of 0,8 Nm.
2. Tighten the cable gland. Use a suitable tool when tightening the cap
nut of the cable gland to prevent the gland from twisting.
Use a tightening torque of 4-5 Nm on the cable gland to
maintain the IP-66 rating on the speaker.
Microphone
Wires
Speaker
Wires
Microphone
Gland
TKIS Kit
Cable Gland:
M20, clamping range of 5-12 mm.
To guarantee the IP-66
rating, use a cable with
Ø 5-6 mm.
