4
switch. Ensure switch is off when plugging in.
18.
Use outdoor extension leads. When tool is used outdoors, use only extension cords
intended for outdoor use.
19.
Stay alert. Watch what you are doing. Use common sense. Do not operate tool when
you are tired.
20.
Check damaged parts. Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts, free running of moving parts, break-
age of parts, mounting and any other conditions that may affect its operation. A guard or other
part that is damaged should be properly repaired or replaced by an authorized service center
unless otherwise indicated in this instruction manual. Have defective switches replaced by an
authorized service center. Do not use the tool if the switch does not turn it on and off.
21.
Warning Use only accessories or attachments recommended in this instruction man-
ual or in the catalogue of ZENIT ТМ.
22.
Have your tool repaired by a qualified person. This electric tool is in accordance with
the relevant safety requirements. Repairs should only be carried out by qualified persons using
original ZENIT TM spare parts. Otherwise this may result in considerable danger to the user.
safety precautions on using hot air gun
•
When heat treating use clamps, vice or other ways of secure mounting of work
piece.
•
Handholding work piece is not secure and may cause loss of balance, tool damage or
body injury.
Description
1. Nozzle
2. Temperature control
3. Handle
technical specifications
Model
HAG-2000
Rated power
2000 W
2
