Zenit Powertools SEMI-PROFI ECS-406/2800 PROFI, Инструкция по эксплуатации

Страница: 5 / 10

5
• Do not touch trunks and limbs with the tip of the bar.
• Use working platform is possible.
• When operating always control tip of the guide bar.
• Do not operate a chain saw in a tree.
• Do not attempt a boring cut if you are not properly trained. A boring cut involves the
use of the nose of the guide bar and can result in kickback.
Rules for operation
• Before operation make sure there is enough light in the working area.
• When operating do not lean forward.
• Make sure you have a secure foothold.
• Never operate the chain saw standing on stairs.
• Never operate the chainsaw above the shoulder level.
• Do not cut materials other than wood or wooden objects.
• Never climb a tree when operating the chain saw.
• Watch for flying debris.
• Do not use the chain saw as a lever or a crowbar. Cut only with the lower part of the
chain. Otherwise it may lead to a kickback.
• Make sure the material to be cut does not include stones, nails and other objects.
ATTENTION! after stopping the motor the chain will rotate for some time by
inertia – INJURY DANGER!
Description
1. Main handle;
2. Attachment for the cord;
3. «On\Off» switch;
4. Service cover for quick graphite brushes change;
5. Front handle;
6. Front protective device with chain stop function;
7. Screw-nut for cover and guide bar fastening;
8. Guide bar
9. Chain
technical specifications