4
switch. Ensure switch is off when plugging in.
18.
Use outdoor extension leads. When tool is used outdoors, use only extension cords
intended for outdoor use.
19.
Stay alert. Watch what you are doing. Use common sense. Do not operate tool when
you are tired.
20.
Check damaged parts. Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts, free running of moving parts, break-
age of parts, mounting and any other conditions that may affect its operation. A guard or other
part that is damaged should be properly repaired or replaced by an authorized service center
unless otherwise indicated in this instruction manual. Have defective switches replaced by an
authorized service center. Do not use the tool if the switch does not turn it on and off.
21.
Warning Use only accessories or attachments recommended in this instruction man-
ual or in the catalogue of ZENIT ТМ.
22.
Have your tool repaired by a qualified person. This electric tool is in accordance with
the relevant safety requirements. Repairs should only be carried out by qualified persons using
original ZENIT TM spare parts. Otherwise this may result in considerable danger to the user.
safety precautions on using bench grinder
1.
Prior to operation check:.
•
completeness and fixture of elements;
•
condition and reliability of the power cord;
•
trial run the bench grinder.
2.
When using bench grinder there is danger of rupture of grinding wheels due to cen-
trifugal force, so each time before operation check integrity of the grinding wheels and inspect
for cracks.
3.
When using bench grinder the following dangerous production factors may occur:
•
open rotating parts of the grinder;
•
particles flying of the grinder;
•
too high voltage;
•
Sharp parts;
•
Increased level of dust;
•
Always use guards and protective glass.
Warning! Always use eye protection.
4.
Before operation wear safety goggles.
5.
Guide the workpiece smoothly with pressure. Don’t stand on the line of pos-
sible fly of wheel parts.
6.
Regularly check grinder while operation.
7.
Do not use lateral surface of the grinding wheel, if the grinding wheel is not
intended for such use.
8.
Do not use bench grinder:
•
Without wheel guard;
•
In gloves or with bandages on fingers;
Содержание BG-150
Страница 1: ...Instruction manual BENCH GRINDER BG 150 350 ...
Страница 2: ......
