6
６．
LED DisPlay
LED lights in three colors dePending on the condition.
The LED lit green color when the oPtical fiber cables are connected to each other and the Power
cord is connected to DC. It indicates Power ON and communication enabled status.
The LED lit red color when the oPtical fiber cables are connected to each other and the Power
cord is connected to DC. It indicates an error occurs in transmission between cables.
The LED lit blue color when the oPtical fiber cables are connected to each other and the Power
cord is connected to DC. It indicates a status that data is being transmitted received from GP-IB.
７．
Precautions for Use
（
1
）
Your eyes may be harmed when you see directly the oPtical connector of Zu-6103EG. If you
need to see directly it with the unaided eye, Put PaPer or others in front of the connector and
check the reflected light.
（
2
）
Do not bend the oPtical fiber cable to radius less than 60mm. Do not give a strong shock
mechanically.
（
3
）
In case of F1(FC)model, fasten the inserted screws after checking the concave Part of device’s
connector and the convex Part of cable’s connector. Fasten the screw to the end with force not
too strong.
（
4
）
For the oPtical fiber cable connector of the F5model, be sure to insert securely. In this case, do
not griP the oPtical fiber cable during tightening. Be sure to insert the connector while
holding the connector body Part always.
（
5
）
Be sure not to aPPly vibration to the oPtical connector from the cable or others.
Communication failure can be caused by shifting of oPtical axis.
（
6
）
When you want to use the oPtical fiber cable outdoor, be sure to sPecify the outdoor use
always.
