3.9 Remote Control Registration
1. Insert key and turn the key to ON position (engine is OFF).
2. Press brake pedal 4 times.
3. On the 4th press, hold the brake pedal down.
4. 3 parking light flashes and 3 siren chirps will confirm remote control
programming mode.
5. Press
Button
Ⅰ
(Lock Button) .
6. After each remote control is added, there will be a confirmation of 2 parking
light flashes and 2 siren chirps. You can add up to 3 2-way remote controls
and 2 1-way remote controls per system.
7. Once the key is turned to the OFF position or 10 seconds without adding a
remote control passes, the system will exit remote control programming
mode.
※
Each time a remote control is added, all remote controls must be
reprogrammed to the system. Adding a remote control erases
previously stored remote controls from the system.
3.10 Remote Start Reservation
Manual transmission vehicles require remote start reservation in order to ensure
that the vehicle is properly prepared for remote start. There are 2 remote start
reservation modes: automatic and manual. Please note that automatic and
manual do not refer to the transmission type. Rather, automatic and manual refer
to the type of remote start reservation.
1. Automatic Remote Start Reservation (Default)
a. Before turning off the engine, put the transmission into Neutral. Ensure that
the parking brake (emergency brake) is engaged. Take foot off of the foot
brake.
b. Turn the key to the OFF position. The engine should still be running.
c. Exit the vehicle within 2 minutes.
d. Once the last door is closed, the engine will turn off.
e. Arm the system. Remote start is ready to be used.
2. Manual Remote Start Reservation
a. Before turning off the engine, put the transmission into Neutral. Ensure that
the parking brake (emergency brake) is engaged. Take foot off the foot brake.
b. Press Button
Ⅲ
for 2 seconds.
c. Turn the key to the OFF position. The engine should still be running.
d. Exit the vehicle within 2 minutes.
e. Once the last door is closed, the engine will turn off.
f. Arm the system. Remote start is ready to be used.
NOTE1:
Remote start reservation type can be changed through the User
Programmable Options.
NOTE2:
If a door, trunk, or hood is opened, remote start reservation will be
cancelled and remote start will not be available.
20
