52
Problems:
Possible Cause:
Remedy:
No picture and sound
when the monitor is
turned on
1. Power wire is connected
improperly or fuse is
blown.
2. System cable isn’t
connected or contacts
unwell.
1. Check the power wire and
replace the fuse.
2. Check the system cable or
replace a new one.
Blurry picture on the
screen
1. Interfered by short-
distanced strong
RF interference (e.g.
motorbike, high voltage
wire, transformation
station or aircraft etc...)
1. The reception of signal
will get better immediately
once leaving the
interference area.
No function on the
remote control (or
operation distance is
shortened)
1. The battery of remote
control has exhausted.
2. Remote control is
destroyed.
1. Change to a new battery.
2. Contact with the dealer and
then change a new remote
control.
The picture on the screen
is relatively dark.
1. The equipment locates
at a low temperature
area.
1. This is the character of LCD
monitor in low temperature,
it will restore to normal
brightness after powering
on the monitor for few
minutes.
ADDITIONAL INFORMATION
TROUBLESHOOTING
ZEM-W600DDMM Manual D+E.indd 52
28.11.2005 12:35:25 Uhr
