ZENEC ZE-NC510, Инструкция по эксплуатации

Страница: 99 / 136

99
ENGLISH
Recalling a station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the corresponding stored station.
AUTO STORE (AS)
■
Press the [AS/PS] button on the front panel or press and hold the
B
button on the
screen to automatic scan and store strong radio stations in the 6 preset channels in the
current band.
PROGRAM SCAN (PS)
1. Press and hold the [AS/PS] button on the front panel or press the
B
button on the
screen. Scan the stations in the 6 preset channels in the current band.
2. Touch the
K
button on the screen to automatically scan all stations in current band to
preview stations.
3. Press any button to stop scanning and listen to the selected station.
SEEK THE PTY (Program Type)
■
Touch
[
on the screen to enter the PTY menu, then touch to select one in the PTY
menu, the unit will auto seek the next available PTY by increasing tuning frequency until
the program type matches the PTY, if no match is found, the tuner will return to original
radio and “None” is displayed.
AF FUNCTION (Alternative Frequency/Auto Following)
■
Touch
[
on the screen to activate/deactivate the AF function. When AF is activated
and a radio signal is too weak, the tuner automatically switches to the best alternative
frequency.

NOTE:
■
During auto switching radio frequency, some interference can eventually be heard. Turn
off the AF function can cease this issue.
TA FUNCTION (Traffic Announcement)
■
Touch
\
on the screen to activate/deactivate the AF function. When TA is activated,
the unit will auto seek an available TP or TA station. After the seeking, no matter if PTY
was found, the tuner will auto seek each station for 1 minute.
■
When TA is activated and a traffic announcement is received, the current playing source
is overridden by the traffic announcement automatically, if the tuner was last set to the
FM band but not, if it was last set to the AM band. When traffic announcement is over,
the current playing source will be resumed.
REGION
■
When AF and Region are activated, auto tuning to those stations within the region is
assigned. When AF is activated and Region is deactivated, auto tuning attempts to find
stations without any region boundary.
MONO
■
When monophonic function is activated, the tuner automatically switches to mono
mode. If monophonic function is deactivated, the tuner automatically switches to mono
mode and stereo mode. It's depending from the signal strengh of the selected radio
station.