ZENEC ZE-NC510, Инструкция по эксплуатации

Страница: 85 / 136

85
ENGLISH
Adjustable Parameters
■
While in RGB mode, the only parameter which can be adjusted is brightness (BRIGHT).
■
To access “PICTURE”, “COLOR”, “CONTRAST” and “TINT” you have to be in CVBS
mode.
Parameter Adjustment Procedure
1. Enter the picture quality setting mode:
Press the PIC button on the remote control.
2. Select the item to be set:
Press the
[
5
] [
6
]
buttons on the remote control.
3.
Set the parameters:
Press the
[
3
] [
4
]
buttons on the remote control to adjust the selected feature to the
desired setting.

NOTE:
■
There must be a video signal present on the AUX or CAMERA input to adjust the above
settings.
PARKING BRAKE INHIBIT
■
When the “PARKING” cable is connected to the brake switch, the display on the TFT
monitor will display video only, when the vehicle is stopped and the parking brake is
applied.
■
Parking brake function is overridden when the video source is set to CAMERA.
■
When the “parking brake inhibit” is active, the front monitor displays “Caution” with blue
background, preventing the driver from watching video while driving to reduce the risk
of a traffic accident. Rear video screens are not affected.
Please see the “INSTALLATION SECTION” for installation.
MONITOR MOVEMENT MECHANISM
■
If an obstruction occurs in the monitor path, the motion will stop automatically to prevent
damage to the mechanism or the monitor.
■
Normal operation is resumed by pressing the
[
`
]
button or disconnecting and
reconnecting the power supply.