ZENEC ZE-NC4110 - MOUNTING INSTRUCTIONS FOR SANTA..., Руководство пользователя

Страница: 10 / 80

10
BASIC OPERATION
POWER ON/OFF
■
Press the PWR/VOL rotary knob on the front panel to turn on the unit. Press and hold
the rotary knob for 2 seconds to turn it off.
■
It's also possible to power the unit together with the ignition, but this depends on the
last state, before the unit was turned off.
Arrow
Current playing mode
SELECT A PLAYING SOURCE
■
After you have turned on the unit, touch the
icon with the current playing mode in the
upper left corner of the screen to go back to
the main menu.
■
After entering the main menu, you have
access to each playing mode and setting.
■
Touch the arrow to choose between the two
pages of the main menu.
NOTE:
■
If a medium is not inserted or the external unit is not connected, the respective icon is
greyed out.
REAR VIEW CAMERA
■
The rear view camera mode will be activated automatically, if a camera is connected
to the camera input, the reverse cable is properly connected (according to mounting
manual) and you shift into reverse gear.
M-ZONE
■
If you have installed monitors for example to the headrests of your car and they are
connected to the M-Zone A/V outputs of the unit, the passenger can operate the unit with
the rear remote control. To choose a playing mode directly (only DVB-T and DVD) at the
unit, touch the M-Zone icon in the main menu. The playing mode DVD is not available, if
you have selected the playing mode SD card or USB for the front zone. The volume of the
M-Zone components can only be altered using the volume adjustment of an external unit
(e.g. IR headphones).