ZENEC ZE-NC3810, Инструкция по эксплуатации

Страница: 56 / 80

56
ANTI-THEFT CODE
■
To secure the unit from theft and later use, it’s possible to enter a four-digit anti-theft code.
If the anti-theft code is activated and the unit will be disconnected from the power supply
and reconnected again, it’s necessary to enter the anti-theft code to start up the unit.
Otherwise it’s not possible to restart it.

NOTE:
■
The delivery status for the input of the anti-theft code is deactivated, so it’s not necessary
to enter the anti-theft code, when the unit was disconnected from the power supply.
1. Touch the Anti theft icon and activate the anti-theft function.
2. Touch the anti-theft code icon and use the keypad, which appears on the screen, to enter
the four-digit anti-theft code and confirm your input by entering the same code a second
time.

NOTE:
■
The delivery status of the anti-theft code, with the freshly unpacked unit is deactivated and you
must activate it manually.
■
Please write down the anti-theft code and keep it stored in a safe place. If the anti-theft code
is falsely entered wrong three times, it’s necessary to enter the super code to unlock the unit
again. To unlock the unit with the super code, it’s inevitable to send it back to an authorized
ZENEC-dealer. This service is not free of charge.
■
If you want to change or deactivate the anti-theft code, you must enter a valid code first.