36
DEUTSCH
ENGLISH
37
EQ
■
Audio control allows you to easily adjust the audio system to get the best possible sound
effect.
1. enter the eQ setup mode
■
Press the [SEl] key on the remote control or touch the EQ icon in the user interface and
the following interface will display on the screen.
2. select eQ mode
■
Touch the EQ selection bar repeatedly and the EQ mode will change.
3. adjust eQ parameters
■
To adjust EQ parameters, touch and drag the EQ parameters adjustment bar.
4.
adjust front/rear/left/right fader and balance
■
you can adjust front/back/left/right balance of the speaker to a desirable listening effect
according to the surroundings and your preference.
■
To adjust Front/Rear/left/Right fader and balance, touch and drag the small white point
in the Fader/balance adjustment area.
notes:
■
The unit provides some EQ modes: user, Rock, hip hop, Dance, latin, Rave, urban,
Acoustic.
■
Different EQ reflects in different bass, Treble and mid level. The parameters of the EQ
modes has been preset and you can not change them besides 'user'.
■
The EQ mode will change to 'user' automatically when you adjust the value of bASS,
TREb or miD under the modes besides 'user'.
■
The value of Sub is independent of EQ mode and can be adjusted solely.
EQ selection
EQ parameters
Fader/balance
adjustment area
TROUBLESHOOTING
■
what appears to be trouble is not always serious. Please check the following points
before calling a service center.
Problem
Cause
Corrective action
general
unit can not power on.
unit fuse blown.
lnstall new fuse with correct rating.
Car battery fuse blown.
lnstall new fuse with correct rating.
lllegal operation.
Reset the unit.
Remote control does not work.
battery depleted.
Change the battery.
battery installed incorrectly.
lnstall the battery correctly.
no/low audio output.
lmproper audio output connection.
Check wiring and correct.
Volume set too low.
lncrease volume level.
Speakers damaged.
Replace speakers.
heavily biased volume balance.
Adjust the channel balance to center position.
Speaker wiring is in contact with metal part
of car.
lnsulate all speaker wiring connections.
Poor sound quality
or distortion.
Pirated disc is in use.
use original disc.
Speaker.
Replace speakers.
wrong connections.
Check wiring and correct.
Speaker is shorted.
Check wiring and correct.
Tel-mute malfunction.
muTE wire is grounded.
Check the 'muTE' wiring and correct.
unit resets itself when engine is off.
lncorrect connection.
between ACC and bATT.
Check wiring and correct.
TFT monitor
monitor does not open automatically.
TFT Auto Open is turned off.
Turn TFT Auto Open on.
warning information is shown at all
times.
Parking break wiring is not correct.
Check wiring and correct.
Flashing image or interference appears
on screen.
The color system of DVD disc does not match
the monitor.
Adjust the color system of the DVD disc playing
back or the monitor in us.
Pirated disc is in use.
use original disc.
Video cable damaged.
Replace cables.
lmproper video signal connections.
Check wiring and correct.
