ZENEC ZE-MC192, Инструкция по эксплуатации

Страница: 98 / 136

98

NOTE:
■
This product features a tuner with RDS function. RDS (Radio Data System) is a system
that transmits broadcast station information together with FM programs.
■
You get display of program service name and PTY, tuning to stations broadcasting a
desired PTY, automatic tuning to traffic information, and emergency broadcasts and
radio text display.
■
RDS service was not available in AM broadcasting. RDS service availability depends on
the FM broadcasting provider.
SWITCH TO RADIO TUNER SOURCE
■
Press the [SRC] button on the front panel or on the remote control to switch to the Tuner
source.
You can also access the tuner mode from the MAIN menu directly.
SELECT FM/AM BAND
■
Touch the
A
button on the screen, or press the BAND button [
■
/BAND] on the remote
control to change among the following bands: FM-1, FM-2, FM-3, AM-1, AM-2.
AUTO TUNING
■
Press the
[

]
button on the remote control or touch the
f
button on the screen to seek
the next available channel by increasing the tuning frequency. Press the button again to
stop searching.
■
Press the
[

]
button on the remote control or touch the
g
button on the screen to seek
the next available channel by decreasing the tuning frequency. Press the button again to
stop searching.
MANUAL TUNING
■
Touch the
D
or
C
button to increase or decrease the tuning frequency one step.
USING PRESET STATIONS
■
6 numbered preset buttons store and recall stations for each band. 6 stored stations
(P01-P06) for the current band appear on the screen, touch the channel directly to select
one of them.
You can touch the arrow
buttons on the screen to select other stations.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch and hold an on-screen preset button (6) for three seconds. The preset number
appears at the top of the screen.
19.
h
Touch to activate/deactivate the MONO function.
0 20. Current radio band indicator.
0 21. Radio frequency indicator.
0 22. User defined equalizer mode.
0 23. Loud setting indicator.
24. Rear setting.
0 25. Volume indicator.
ZE-MC192 Manual D+E def.indd 98 13.09.2007 17:32:59 Uhr