Zencam E1B, Руководство пользователя

Страница: 7 / 49

7
Please refer to Figure 2-2 for ceiling mount.
Figure 2-2
The exact installation steps are shown as follows:
Step 1: Drill holes on the proper installation surface according to the hole sites on the quick installation
board.
Step 2: Knock the expansion bolts provided in the kit into the drilled holes.
Step 3: Use self-tapping screws to fix the quick installation board well.
Step 4: Connect to device power.
Step 5: Adjust the monitoring angle and stick the device on the quick installation board.
Note:
⚫
This quick start guide is for reference only. Slight difference may be found in user interface.
⚫
All the designs and software here are subject to change without prior written notice.
⚫
All trademarks and registered trademarks mentioned are the properties of their respective owners.
⚫
If there is any uncertainty or controversy, please refer to the final explanation of us.
⚫
Please visit our website or contact your local service engineer for more information.