•
Attach the other side frame, with the two pressure corners already connected, to the assembled frame. You
should now have a rectangle shaped floor with four fingers facing up.
•
Flip the top screen frame over and insert the four pressure connectors into the frame of the stand.
Step 4
–
Door Assembly
•
Attach the doorknobs to the door panels using screws provided (Part M) to the doors (Part L).
•
Insert top edge of either the right or left door into the back-top door rail and then align with the back bottom
door rail and drop into place.
•
Insert top edge of either the right or left door into the front top door rail and then align with the front bottom
door rail and drop into place.
Step 5
–
Support Bars (Optional)
•
If you plan on using substrate over 100 lbs., but less than 250 lbs, use the support bars provided. Simply place
on top of the deluxe stacking spacer.
