Zelmer ZVC545CQ, Руководство пользователя

Страница: 51 / 52

57
ZVC545-001_v01
The damaged inlet filter should be replaced with
a new, genuine manufactured product only.
7 Insert the SAFBAG dust bag module to the vacuum
cleaner chamber.
8 Close the cover by pressing it until you hear
a characteristic click – pay attention not to trap the dust bag.
HEPA 13 OUTLET FILTER
The vacuum cleaners are equipped with an H13 outlet filter
HEPA (High Efficiency Particulate Air).
1 In order to replace the HEPA filter, press the blocking
mechanism of the outlet filter cover and slide up the cover of
the vacuum cleaner.
2 Remove the HEPA filter cassette and replace it with
a new one. The HEPA filter assures circa 1 year of effective
usage.
3 Slide the outlet filter cover back on in such a way that the
fastenings on the side of the cover fit into the sliders in the
vacuum cleaner housing. The filter cover fastening should
close.
SAFBAG dust bag disassembly/assembly
E
1 The vacuum cleaner is equipped with safety valve located
in chamber of dust container (bag). It opens automatically
in case of total stopping of suction hose or total stopping of
equipment elements connected thereto, as well as in case
of overfill of dust bag. After opening the valve one can hear
characteristic “whirr” sound inside the vacuum cleaner.
2 When the “Dust bag full” indicator light (7) comes on
when the nozzle or brush is above the floor, it indicates that
the bag needs to be replaced. The “Dust bag full” indicator
light may come on when the suction hose or connected
accessories become clogged.
3
Switch off the vacuum cleaner by pressing the on/off
button (8) and unplug the appliance.
4
Press the two side buttons on the end of the hose and
remove the hose end from the inlet opening of the vacuum
cleaner.
5 Release the front cover fastening (10) and open the cover.
6 Remove the SAFBAG dust bag module from the vacuum
cleaner chamber (14) .
7 While holding the module, pull the frontal part of the bag
plate upwards and remove the bag. Close the SAFBAG bag
cap to close the full bag. Dispose of the bag.
8 Slide the plate of the new bag in the direction shown in
the picture. The end of the plate should lock in the socket.
The bag cap should be on top. The direction is shown by an
arrow placed on the bag.
●
Put the SAFBAG module together with the assembled
bag (14) into the vacuum cleaner container so that the
cogs of the SAFBAG module fit into the holes in the
container wall. Press and close the cover until you hear
the characteristic clicking sound – be careful not to catch
the bag.
D
Do not vacuum without SAFBAG bag module
installed. The lack of SAFBAG bag module
disables to slam the upper cover of vacuum
cleaner.
ZELMER vacuum cleaners are equipped with SAFBAG dust
bags in the amount indicated in the table. It is recommended
to replace the dust bag if:
a) the “Dust bag full” indicator light will come on,
b) the safety valve activates,
c) the vacuum cleaner operates poorly,
d) the dust bag is full.
The number of SAFBAG bags set that can be purchased,
is placed on a sticker located in the vacuum chamber.
Accessory holder
F
The accessory holder allows hanging accessories (suction
tube, small nozzle, small brush, crevice nozzle, combination
brush, turbobrush or parquet brush) for example in the closet.
1 Join the holder elements.
2 Screw the holder (for example to the wall of the closet)
using the four provided screws.
3
Fit the accessories onto the holder as shown in the picture.
End of operation cleaning
and maintenance
1
Switch off the vacuum cleaner by pressing the “on/off”
button (8) .
2 Unplug the appliance.
3 Wind the cord by pressing the cord rewind button (1) .
While doing this hold the cord to make sure it is not tangled
and the plug does not hit the vacuum cleaner housing.
4 Disconnect the telescopic tube from the nozzle or brush.
5 Disconnect the telescopic tube from the hose. In order to
remove the tube from the hose handle press the “A” locking
device and pull the tube in the direction of the arrow.
6
Press the two side buttons on the end of the hose and
remove the hose end from the inlet opening of the vacuum
cleaner.
7 The vacuum cleaner may be stored vertically or
horizontally. In order to do so, insert the fastening hook of the
combination brush to the combination brush fastener. The
hose may be attached to the vacuum cleaner, however you
have to make sure that it is not excessively bent during storing.
8 If necessary wipe the housing and the dust bag container
with a damp cloth (it may be soaked with dishwashing liquid)
and dry it or wipe until dry.
Do not use abrasive detergents or solvents.
G