Zelmer ZVC415SP, Руководство пользователя

Страница: 41 / 44

47
ZVC415-001_v01
Technical parameters
The type of the vacuum cleaner and the technical parameters
are indicated on the rating label. Mains protection 16A.
Does not cause interferences with audio/video devices.
Does not require grounding
.
ZELMER vacuum cleaners meet the requirements of the
applicable norms.
The appliance is in conformity with the requirements of the
directives:
–
Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
The device meets the requirements of Commission
Regulation (EU) No. 666/2013 on implementing the Directive
of the European Parliament and of the Council 2009/125/EC
with regard to eco-design requirements for vacuum cleaners.
The device complies with the requirements of the
Commission Delegated Regulation (EU) No. 665/2013
supplementing Directive of the European Parliament and of
the Council 2010/30/EU with regard to energy labelling of
vacuum cleaners.
Noise level: 74 dB(A) (ZVC415SP), 75 dB(A) (ZVC415ST).
The appliance was marked by a CE sign on the rating label.
Static electricity
In the process of vacuuming of some surfaces in areas of
low air humidity the device may become electrically charged.
It is a natural phenomenon – it does not damage the device,
and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend you to:
●
discharge the device by touching metal items in the room
with the pipe,
●
increase air humidity in the room,
●
use widely available antistatic agents.
Appliance elements
A
1 ON/OFF button
2 Handle
3 Cord rewind button
4 Combination brush fastening
5 Accessory compartment cover
6 Plug and cord
7 Outlet filter cover
8 Power increase button
9 Suction power level indicator
10 Power decrease button
11
Dust bag full indicator
12 Front cover fastening
13 Suction hose
14 Outlet filter EPA E11 (installed in the vacuum cleaner)
15 Inlet filter (installed in the vacuum cleaner)
16 SAFBAG dust bag (1 piece, (installed in the vacuum
cleaner)
17 Telescopic suction tube
18 Small brush
19 Crevice nozzle
20 Small nozzle
21 Turbobrush (in type ZVC415ST)
22 Switchable combination brush
23 Parquet brush “BNB”
Is used to clean and polish hard, scratch sensitive
surfaces such as wooden floors, floor panels, parquet,
marble, tiles, etc.
Delicate and soft natural bristles ensure maximum
vacuum effectiveness and protects against scratching
the cleaned surface.
24 Suction nozzle for mattresses cleaning (in type ZVC415SP)
VACUUM CLEANER ZVC415 TYPES
Workmanship
and
equipment
option
Type
Adjustable suction power
Safety valve
Dust bag full sensor
No bag protection
Dust bag/amount
Outlet filter
Suction tube
Switchable combination brush
Small nozzle
Crevice nozzle
Small brush
Turbo brush
Parquet brush “BNB”
Suction nozzle for mattresses cleaning
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
ZVC415ST + + + + SAFBAG 1 piece EPA E11 Telescopic + + + + + + –
ZVC415SP
+ + + +
SAFBAG 1 piece EPA E11 Telescopic
+ + + + – + +