69
ZVC355-001_v02
PROBLEM
SOLUTION
The cut-out of the
wiring system has been
triggered.
Check if there are any other devices,
besides the vacuum cleaner, plugged
into the same electrical circuit. If the
cut-out is triggered again, have
the vacuum cleaner repaired in
a servicing center.
The vacuum cleaner does
not work; the body or the
power cord is damaged.
Have the vacuum cleaner repaired in
a servicing center.
Ecology – Environmental protection
Each user can contribute to protect the environment. It is
neither difficult nor expensive. In order to do so:
Return cardboard packages to recycling
points.
Throw polyethylene (PE) bags into appropriate
containers.
Return a worn out appliance to an appropriate
collecting point as the components of the
appliance may pose a threat to the environment.
Do not dispose the appliance with the municipal waste!
6
Snap the bottom of the CYKLON dust container shut.
Pay attention that the seal on the bottom of the container
remains correctly placed.
7
Place the emptied CYKLON dust container into the
chamber of the vacuum cleaner. A characteristic “click”
signalizes the container has been properly installed.
After-work procedures, cleaning, and
maintenance
1
Press the on/off button
(4)
to stop the vacuum cleaner.
2
Remove the plug of the cord from the socket.
3
Wind the cord by pressing the cord winder button
(7)
.
Hold the cord when doing it to avoid tangling the cord up or
letting the plug hit the vacuum cleaner.
4
Disconnect the telescopic suction pipe from the nozzle or
brush.
5
Disconnect the telescopic suction pipe from the hose.
6
Press the button situated on the end of the hose, and
remove the end of the hose from the inlet of the vacuum cleaner.
7
The vacuum cleaner may be store in a vertical or
horizontal position. The hose may stay attached to the
vacuum cleaner as long as it is not bent too much during
storage.
Horizontal storage:
–
place the hook of the nozzle brush into the fastening
of the nozzle brush situated at the back of the vacuum
cleaner, near the entrance of the power cord.
Vertical storage:
–
place the nozzle brush on the telescopic pipe,
–
then insert the hook of the telescopic pipe into the
fastening situated on the bottom of the vacuum cleaner,
near the front wheel.
8
If necessary, clean the casing and the chamber of the
vacuum cleaner with a damp cloth (it may be damped in
dishwashing liquid), dry it off, and wipe it dry.
Do not use any scrubbing agents or solvents.
Examples of problems you may encounter
when using the vacuum cleaner
PROBLEM
SOLUTION
A characteristic fluttering
in the vacuum cleaner is
heard.
• Check the CYKLON dust container
and other accessories. Remove the
reason for the clog-up or empty and
clean the CYKLON dust container.
• Replace or clean the filters.
The vacuum cleaner works
less efficiently.
Empty and clean the CYKLON dust
container, replace or clean the filters,
check the suction pipe, the hose, and
the nozzle – remove the reason for
the clog-up.
G
The importer/manufacturer does not accept any liability for any
damages resulting from unintended use or improper handling.
The importer/manufacturer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
Содержание zvc355
Страница 64: ...Notes ...