![Zelmer zvc355 Скачать руководство пользователя страница 62](http://html1.mh-extra.com/html/zelmer/zvc355/zvc355_user-manual_3493159062.webp)
68
ZVC355-001_v02
FOAM OUTLET FILTER
1
In order to replace the foam outlet filter
(14)
press the
fastening on the cover of the filter, and remove the cover of
the filter from the vacuum cleaner.
2
Pull the handle situated on the frame of the foam outlet
filter
(15)
to the right, pull the frame aside towards you, and
remove it from the vacuum cleaner.
3
Remove the foam outlet filter from the frame.
If the foam outlet filter
(14)
is dirty, you may replace it with
a new one, clean it or rinse it with running water. Before
reinstalling the filter, make sure it is dry.
For safety reasons it is unacceptable to install
a wet or damaged foam outlet filter (14).
4
Place the new/rinsed filter carefully into the frame.
5
Situate the frame with the foam outlet filter
(14)
into
the vacuum cleaner, so that both of the fastenings on the
right side are fitted into the holes in the body of the vacuum
cleaner.
6
Block the frame from its left side in such a way that the
fastenings of the frame are inserted into the holes in the
body of the vacuum cleaner.
7
Place the filter cover in such a way that the two
protrusions situated in the lower part of the cover are
inserted into the holes in the body of the vacuum cleaner,
then press the filter cover to snap the fastening in the body
shut. A characteristic “click” signalizes the cover has been
properly installed.
Do not use the vacuum cleaner without the
inlet filters and the outer filter installed.
Always replace damaged filters with original,
brand new ones.
TUBE OF THE CYKLON DUST CONTAINER
It is necessary to periodically clean the tube of the CYKLON
dust container.
1
Remove the CYKLON dust container and empty it, as
described in para.
C
.
2
Press the button situated on the CYKLON dust container,
and open its bottom. If the CYKLON dust container is full,
empty it as described in para.
C
.
3
Remove the tube of the CYKLON dust container from the
container.
4
If the tube of the CYKLON dust container
(19)
is dirty,
it may be rinsed with running water. Before reinstalling the
tube, make sure it is dry.
5
Insert the rinsed tube of the CYKLON dust container into
the socket of the container in such a way that the protrusion
situated on the flange of the tube is situated in the socket of
the body of the container. The other end of the tube is to be
inserted into the round socket situated on the bottom of the
chamber, where the tube is placed.
E
F
It is forbidden to wash filters in washing
machines or dishwashers.
Filters may be dried only naturally.
Do not use hairdryers, heaters or radiators to
dry filters.
Before replacing the filters make sure the
vacuum cleaner is off, and the plug of the cord
is unplugged from the socket.
EPA INLET FILTER AND FOAM INLET FILTER
It is necessary to periodically clean the EPA inlet filter and
the foam inlet filter to remove small fractions of dust.
Remove the CYKLON dust container and empty it, as
described in para.
C
.
1
Remove the EPA inlet filter
(16)
from the CYKLON dust
container.
2
Remove the foam inlet filter
(17)
. If the foam inlet filter
(17)
is dirty, you may replace it with a new one, clean it or
rinse it with running water. Before reinstalling the filter, make
sure it is dry.
The main function of the foam inlet filter
(17)
is to protect the
EPA inlet filter
(16)
against excessive dirt.
For safety reasons it is unacceptable to install
a wet or damaged foam inlet filter (17).
●
Clean the pleats of the EPA inlet filter
(16)
, and if the filter
is damaged, it should definitely be replaced with a new
one. If the EPA inlet filter
(16)
is dirty, you may replace
it with a new one, clean it or rinse it with running water.
Before reinstalling the filter, make sure it is dry.
For safety reasons it is unacceptable to install
a wet or damaged EPA inlet filter (16).
●
Situate the new/rinsed foam inlet filter in the previously
determined spot.
3
Place the new/rinsed EPA inlet filter
(16)
in the previously
determined spot in the dust container.
4
Situate the CYKLON dust container with the installed
EPA inlet filter
(16)
in the chamber of the vacuum cleaner.
A characteristic “click” signalizes the container has been
properly installed.
We advise you to replace the EPA inlet filter
(16) with a new one every 6 months of use.
Do not use the vacuum cleaner without the EPA
inlet filter (16) installed in the CYKLON dust
container. If the EPA inlet filter is not there,
it is impossible to situate the CYKLON dust
container in the vacuum cleaner.
D
Содержание zvc355
Страница 64: ...Notes ...