32
ZVC015ZQ-001_v02
7
Clean or replace a dirty filter. You can rinse the filters
under running water. Make sure the filter is fully dry before
use.
8
Clean the CYCLONE module. Open the cover and
remove the accumulated rubbish.
9
Put the CYCLONE module components back in place.
To ensure your safety do NOT install a damp or
damaged CYCLONE module.
10
Insert the CYCLONE module into dust container aligning
it with the indents.
11
Place the dust container in the vacuum cleaner until you
hear a distinctive click.
ELECTROBRUSH CLEANING
During operation, the electrobrush roller collects pieces
of: threads, strings, hair, rags, etc. They reduce cleaning
efficiency, therefore it is necessary to periodically clean the
electrobrush roller.
In order to remove dirt from the electrobrush roller, follow the
steps below:
1
In order to disconnect the brush from the vacuum cleaner
housing, press the electrobrush release button.
E
2
With a flat, narrow object, such as coin or screwdriver,
turn the cover lock from closed position “ ” to open position
“
”. Remove the cover and take out the roller.
3
Carefully clean the electrobrush roller with scissors or
sharp knife. Move the scissors or the knife so as to catch
the hair or threads tangled on the roller. Cut them and then
remove from the roller.
Be careful not to damage the bristle or the
roller of the electrobrush.
4
Install the cleaned roller in the electrobrush. The roller
should properly fit into the electrobrush holes. Press the
other end of the roller to the electrobrush housing.
●
Install the cover. Turn the cover lock into position “ ”.
STORING
1
It is most convenient to store the vacuum cleaner in an
upright position. To reduce the space occupied, store the
vacuum cleaner with the handle folded.
2
If necessary clean the housing and the dust container
with a damp cloth (possibly moisten with a washing-up
liquid), dry or wipe dry.
F
Examples of problems while operating the vacuum cleaner
PROBLEM
POSSIBLE REASON
ACTION
The appliance does not operate. Batteries are discharged.
Charge the batteries.
The suction power of the
vacuum cleaner is week.
The dust container is full.
Empty and clean the dust container.
The EPA E10 filter is clogged.
Clean or replace the EPA E10 filter with a new one.
The air inlet or the electrobrush roller
is clogged.
Clean the electrobrush roller, unclog the air inlet.
The vacuum cleaner is not
charging.
The power cord plug is not plugged
to the wall socket.
Plug the power cord to the wall socket.
The vacuum cleaner operating
time after charging is very short.
Charging time was too short.
Charge the appliance according to the
instructions.
Ecology – Environmental protection
Each user can contribute to protect the environment. It is
neither difficult nor expensive. In order to do so:
Return cardboard packages to recycling points.
Throw polyethylene (PE) bags into appropriate
containers.
Batteries contain substances harmful to the
natural environment. Do not throw them away
with other household waste. Return used
batteries to recycling points.
Before disposing of or returning the appliance to a recycling
point make sure to remove the batteries from the battery
compartment. Return a worn out appliance to an appropriate
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his right to modify the product any time
in order to adjust it to the regulations, norms, directives or due to
construction, trade, aesthetic or other reasons without notifying in
advance.
collecting point as the components of the appliance may
pose a threat to the environment.
Do not dispose the appliance with the municipal waste!
Содержание zvc015zq
Страница 20: ...26 ZVC015ZQ 001_v02 ZELMER Zelmer ZELMER C 8 EPA BG...
Страница 23: ...29 ZVC015ZQ 001_v02 EPA E10 EPA E10...
Страница 27: ...Notes...
Страница 28: ...Notes...