![background image](http://html.mh-extra.com/html/zelmer/zsm2102x/zsm2102x_user-manual_928317027.webp)
27
GW26-008_v08
●
Never place the appliance on or near gas or electric
cookers or in places where it might touch a hot oven
or microwave.
●
Never cover the appliance when it is hot or connected
to the mains supply.
●
The appliance is designed for use only in households
located up to 2000 m above sea level.
Operation and functioning of the sandwich
maker
BEFORE FIRST USE OF SANDWICH MAKER:
●
Remove from the pack.
●
Check whether the voltage indicated on the device
corresponds to the voltage on the power supply network.
●
Clean the device, wiping its external and internal surfaces
with a damp cloth or paper towel.
When you turn on and use the grill for the first
time, as far as heating up the heating elements
may be a slight "smell of burning". This is
not a threat or evidence of malfunction of the
product. The smell should disappear after
several use.
●
Turn it on for about 15 minutes to remove any leavings
from the manufacturing process. Then turn off the
sandwich maker and allow to cool completely.
DURING FURTHER USE OF SANDWICH MAKER:
●
Put it on a dry, flat surface near an AC outlet.
●
Insert the plug into an AC outlet (the two indicator lights -
orange and green - will turn on).
●
Wait until the green light goes out (it takes about 3-4
minutes), which means that the heating plates have
reached the temperature that allows for roasting.
5
4
1 2
3
6
7
SUGGESTION
Information on the product and
suggestions for its use
●
The sandwich maker is a class I appliance equipped
with a connecting cord with a protective conductor and
a plug with an earth pin.
●
The appliance is intended solely for household use,
indoors.
Technical data
The technical parameters are given on the data plate of the
product.
Characteristics of the appliance
A maker enables a quick preparation of warm es with filling.
One or two slices of toasting bread can be toasted at a time.
The heating plates of the sandwich maker are divided into
four triangular spaces and are covered with a teflon coating
which prevents the sandwiches toasted from adhering to the
heating plate. Connecting metal elements with parts made
of plastics creates an interesting exterior of the sandwich
maker. There are two control lights on the sandwich maker
which signal as follows:
–
orange – connection to the power supply,
–
green – ready to toast.
Construction of sandwich maker
1
Green colour lamp
2
Orange colour lamp
3
Upper body
4
Lower body
5
Catch
6
Lower heating plate
7
Upper heating plate
Содержание ZSM2102X
Страница 29: ...GW26 008_v08 Notes ...
Страница 30: ...GW26 008_v08 Notes ...
Страница 31: ...GW26 008_v08 Notes ...