105
Polski
Magyar
Română
Ру
сск
ий
Česky
Slovenčina
Бълг
арск
и
Ук
раїнськ
а
English
SH1610-005_v02
– While the shaver is charging, the shaver body or AC adaptor may emit
a slight noise and/or become slightly warm. This is not a defect.
USING THE SHAVER WITH AC POWER SUPPLY
Check if the shaver is off. Insert the socket plug of the AC adaptor securely into the socket
at the bottom of the shaver. Insert the outlet plug of the AC adaptor into the outlet. Turn on
the shaver.
If the shaver will not operate by pressing the power switch immediately after
the plugs are inserted, the rechargeable battery is completely depleted. In
that case, turn off the shaver, put it away for 1 minute to charge the battery
and turn it on again.
After use, be sure to turn off the shaver and then unplug the AC adaptor
from the outlet and the socket of the shaver.
In a humid place, such as bathroom, do not use the shaver with an AC
power supply.
When using the shaver with an AC power supply, do not use soap or
shaving foam.
The energy stored in the rechargeable battery decreases even while the
shaver is used with an AC power supply. Recharge the shaver once every
three weeks.
Cap
ON/OFF
switch
Lock button
USE
If the outer foil is deformed or damaged,
replace it with a new one (see the
“REPLACEMENT OF OUTER FOIL / INNER
BLADE” section). Otherwise, it may
scratch your face.
1
Remove the cap and turn on the shaver by pressing
the lock button and sliding the ON/OFF switch to ON.
Содержание ZSH16100
Страница 111: ...SH1610 005_v02 ...
Страница 112: ...SH1610 005_v02 Zelmer Pro Sp z o o ul Hoffmanowej 19 35 016 Rzeszów POLAND ...