![background image](http://html1.mh-extra.com/html/zelmer/zmm1510b/zmm1510b_user-manual_3450200001.webp)
ZMM1510B
INSTRUKCJA UŻYTKOWANIA
Maszynka do mielenia mięsa
NÁVOD K POUŽITÍ
Mlýnek na maso
USER MANUAL
Meat mincer
BENUTZERHANDBUCH
Fleischwolf
PL
EN
DE
CZ
NÁVOD NA UOBSLUHU
Mlynček na mäso
SK
HASZNÁLATI UTASÍTÁS
Húsdaráló
HU
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
Мясорубка
INSTRUCȚIUNI DE UTILIZARE
Mașină de tocat carne
RO
RU
ИНСТРУКЦИИ ЗА УПОТРЕБА
Месомелачка
ІНСТРУКЦІЯ ПО ЗАСТОСУВАННЮ
М'ясорубка
UA
BG
LIETOŠANAS INSTRUKCIJA
Gaļas maļamā mašīna
NAUDOJIMO INSTRUKCIJA
Mėsmalė
LT
LV
ZMM1510B
WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS
TO YOUR SATISFACTION AND PLEASURE.
DESCRIPTION
1. Main unit
2. Switch
3. Lock button
4. Mincing chamber
5. Feed screw with assembled coupling
6. Blade
7. Mesh sieve with 5mm holes
8. Mesh sieve with 6.8mm holes
9. Ring collar
0. Food tray
11. Food pusher
12. Sausage accessory
SAFETY INSTRUCTIONS
If the supply cord is damaged it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Respect the operating times of the accessories indicated
in their specific sections of the manual.
Proceed according to maintenance and cleaning section
of this manual for cleaning. Warning: potential injury
from misuse!
Care shall be taken when handling the sharp cutting
blades and during cleaning.
Always disconnect the appliance from the supply if it is
left unattended and before assembling, disassembling or
cleaning.
Switch off the appliance and disconnect from supply
before changing accessories or approaching parts that
move in use.
This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved. Children shall not play with the
appliance.
This appliance is intended for use at a maximum altitude
of 2000m above sea level.
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for commercial or industrial use under
any circumstances. Any incorrect use or improper handling of the product shall render the warranty null
and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and/or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle Unplug the product immediate-
ly from the mains in the event of any breakdown or damage and contact
This appliance is designed for home use and should never be used for commercial or industrial use under
any circumstances. Any incorrect use or improper handling of the product shall render the warranty null
and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
Do not pull on the connection cord in order to unplug it or use it as a handle.
Do not process tough foods, such as bones, nuts (such as dry and hard soybeans) or other food with tough
fiber.
Please utilize the feeder push during operation, instead of pushing food by hands.
Check the filter before squeezing juicer per time. Do not use the juicer any more in case of any cracks or
damage, and get in touch with the nearest dealer and manufacturer.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an
official technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official technical support service may carry out repairs or
procedures on the device.
B&B Trends S.L.
disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
INSTRUCTIONS FOR USE
Meat Grinder
The continuous operation should not exceed 5 minutes; suspend the operation in the event of exceeding
5 minutes and restart the machine after cooling down.
Installation method for meat grinder.
Step 1: put the screw into the tee-junction of minced meat (as shown in the picture) (Fig.1)
Step 2: assemble the blade on the screw shaft (as shown in the picture) with blade outward (failure will be
caused by incorrect placement). (Fig.2)
Step 3: attach the mesh sieve to the blade (select mesh sieve as needed), and lock the half slot of mesh
sieve to the adjusting pin of tee-junction (as shown in the picture). (Fig.3)
Step 4: press on the center of the mesh sieve with one hand and screw the aluminum alloy cap with the
other hand (as shown in the picture). (Fig.4)
Step 5: hold and tilt the tee-junction of minced meat toward the switching push button at about 45 degrees
embedded in the output gear, anticlockwise screw in the body (as shown in the picture) for fastening, and
the lock button will automatically fix the tee-junction. (Fig.5)
Step 6: put and fix the material plate into the tee-junction, and fix the assembled appliance on a stable
surface. (Fig.6)
Operational Approach:
Cut the meat into long strip of about 20mm×20mm×60mm (meat without bone or tendons is recommen-
ded) and put it into the material plate
,
Turn on the power switch, and put the prepared meat into feed port of tee-junction in turn after confirming
the normal operation of the appliance.
In case the food failed to be automatically drawn into the meat screw, slowly press the food with feeder
push. (Feeder push is allowed only).
Please disconnect the power plug after use.
Note: in case food locked in the screw out of work during the operation, immediately turn off the power.
Making Sausages
Installation method:
Step 1: put the screw of minced meat into the tee-junction (as shown in the picture). (Fig.7)
Step 2: assemble sausage filter (as shown in the picture). (Fig.8)
Step 3: put the sausage tube into the tee-junction (as shown in the picture). (Fig.9)
Step 4: screw up the aluminum alloy cap (as shown in the picture). (Fig.10)
Step 5: hold and tilt the tee-junction of minced meat toward the switching push button at about 45 degrees
embedded in the output gear, anticlockwise screw in the body (as shown in the picture) for fastening, and
the lock button will automatically fix the tee-junction. (Fig.11)
Step 6: put and fix the material plate into tee-junction. (Fig.12)
Operational approach:
Fix the assembled appliance on the stable surface, turn on the power switch, embed the clean-washed
casing into the discharge port (for fastening) after confirming the normal operation of the appliance, put the
marinated food into the material plate, and push it into feed port by feeder push.
Please disconnect the power plug after use.
Scope of application: a variety of meat without bone or tendon, meat and seasoning mixture.
MAINTENANCE AND CLEANING
Before cleaning, always turn off the appliance and unplug it from the power supply.
Do not immerse the appliance and power cord in water or other liquids or wash them in the dishwasher.
Prompt: it is suggested that clean the appliance immediately after use, which is
easy for cleaning.
In the event of disassembling the appliance, rotate the appliance on the
opposite direction of installation direction.
When disassembling all tee-junctions, press on the lock button 1 with one hand and screw off the tee-junc-
tion with the other hand as the direction of the arrow shown in the right picture.
Please be careful for the disassembly of the appliance, so as not to scratch your fingers.
Do not use abrasives, scrubbers, acetone and alcohol to clean juicer.
Since some parts are relatively sharp, clean them with a brush, so as not to scratch fingers;
Neither immerse the motor in water, nor rinse it under the water tap. Water temperature for cleaning should
not exceed 60 ° C.
Only plastic parts are suitable for dishwashing machine.
It is forbidden to wash metal accessories in the dishwasher, as the aggressive cleaning agents used in
these devices may discolor the metal parts and damage them.
Those parts should be rinsed under running water and dried immediately.
Table of recipes
The continuous operation should not exceed 5 minutes; suspend the operation in the event of exceeding
5 minutes and restart the machine after cooling down.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic devices,
known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework
applicable in the European Union for the disposal and reuse of waste electronic and electrical
devices. Do not dispose of this product in the bin, instead going to the electrical and electronic
waste collection centre closest to your home.
AF-MANUAL_MEAT GRINDER ZELMER ZMM1510B.pdf 1 7/3/22 9:23
Содержание ZMM1510B
