Zelmer Solaris Twix 5500.0 HQ, Руководство пользователя

Страница: 56 / 58

62
5500-003_v02
PROBLEM ACTION
The remote power control
(type 5500.3) does not
work.
• The batteries do not sufficiently
connect or are incorrectly inserted.
– Open the battery compartment
in the hose handle and press the
batteries into place. Make sure
that the poles – and + are directed
properly.
• The batteries may be dead
– Replace the batteries
Ecology – Environmental protection
Each user can contribute to protect the environment. It is
neither difficult nor expensive. In order to do so:
Return cardboard packages to recycling points.
Throw polyethylene (PE) bags into appropriate containers.
Batteries contain substances harmful to the
natural environment. Do not throw them away
with other household waste. Return used
batteries to recycling points. Before disposing
of or returning the appliance to a recycling
point make sure to remove the batteries from
the battery compartment (type 5500.3).
Return a worn out appliance to an appropriate collecting
point as the components of the appliance may pose a threat
to the environment.
Do not dispose of with household waste!!!
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his right to modify the product any time
in order to adjust it to the regulations, norms, directives or due to
construction, trade, aesthetic or other reasons without notifying in
advance.
End of operation cleaning
and maintenance
Switch off the vacuum cleaner by pressing the “on/off”
●
button (7) .
Unplug the appliance.
●
1 Wind the cord by pressing the cord rewind button (12) .
While doing this hold the cord to make sure it is not tangled
and the plug does not hit the vacuum cleaner housing.
Disconnect the telescopic tube from the nozzle or brush.
●
2 Disconnect the telescopic tube from the hose. In order to
remove the tube from the hose handle press the “A” locking
device and pull the tube in the direction of the arrow.
3
Press the two side buttons on the end of the hose and
remove the hose end from the inlet opening of the vacuum
cleaner.
4 The vacuum cleaner may be stored vertically or
horizontally. In order to do so, insert the fastening hook of
the combination brush to the combination brush fastener.
The hose may be attached to the vacuum cleaner, however
you have to make sure that it is not excessively bent during
storing.
If necessary wipe the housing and the dust bag container
●
with a damp cloth (it may be soaked with dishwashing
liquid) and dry it or wipe until dry.
Do not use abrasive detergents or solvents.
Examples of problems while operating the
vacuum cleaner
PROBLEM ACTION
A characteristic “fluttering”
of the vacuum cleaner is
heard which indicates the
opening of the safety
valve.
• The dust bag may be full – replace
the dust bag.
• Replace the dust bag even if it is not
full yet. In unfavorable conditions, fine
dust might have clogged the pores on
the surface of the dust bag.
• The suction tube, the hose or the
attachment is blocked – remove the
cause of the clogging.
The dust bag is damaged. Remove the dust bag and the filters.
The suction power of the
vacuum cleaner is weak.
Replace the dust bag and the filters,
check the suction tube, the hose and
the nozzle - remove the cause of the
clogging.
The electrical installation
fuse went out.
Check if other appliances are not
plugged to the same electrical circuit
as the vacuum cleaner. If the fuse
goes out repeatedly, return the vacuum
cleaner to a service point.
The vacuum cleaner does
not operate; the housing or
the cord is damaged.
Return the vacuum cleaner to
a service point.
I