47
SB1000-001_v01
Controls and Operation
B
PREPARING THE APPLIANCE FOR OPERATION
Wash the blender jug
(5)
, lid
(7)
and stopper
(9)
in warm
water with washing-up liquid, rinse thoroughly and dry before
the first use (or after the stand blender was stored unused for
a long period of time).
Be careful with the sharp blades.
CONTROL PANEL
The blender has an illuminated control panel, which goes on
after the blender jug has been mounted (the cord is plugged
into the mains socket). When the panel illumination is on, the
appliance is ready for use.
You can use “–” and “+” to select one of 5 available blade
rotation speeds. Blade rotation speed indicator shows the
selected rotation speed, displaying 1 to 5 illuminating diodes
depending on the rotation speed. Press the ON/OFF button
to run the appliance at the chosen speed.
The appliance has been equipped with quick start
programmes for user comfort. You can choose between
three programmes:
“PULSE”
,
“ICE”
and
“TURBO”
, using
appropriate buttons on the control panel.
ENERGY SAVING MODE
If no actions are taken for 1 minute in the stand-by mode or
when the appliance is no longer in use, the stand blender
will go to the energy saving mode (control panel illumination
goes out). If any button is pressed, the appliance will return
to the normal working mode (the control panel illumination
goes on).
CONTROLS AND OPERATION
A stand blender is designed for chopping
and mixing various kinds of products. It can
be used to prepare soups, sauces and milk
shakes, you can also mix vegetables, fruits and
meat, as well as pound cooked ingredients into
food for the infants.
1
Place the motor unit
(1)
on a dry, level and stable surface
near a mains socket. Make sure that the motor unit is placed
out of the reach of children.
Do not let the cord hang over the edge of a table
or work surface to prevent accidental pulling or
catching.
2
Plug the cord into the mains socket.
3
Mount the blender jug
(5)
onto the motor unit so that the
protruding element in the jug base fits in the cut-out in the
motor unit
(1)
.
4
Turn the blender jug clockwise
(5)
to lock it in place.
5
Control panel illumination goes on.
Technical specification
Technical parameters are indicated on the nameplate of the
product.
Admissible time of uninterrupted operation: 2 minutes.
The time interval between two successive processes of
mixing: 10 minutes.
Maximum noise level: 85 dB/A.
The stand blender is built in 2nd isolation class. It does not
require connection to the socket equipped with grounding
pin.
The stand blender meets the requirements of standards in
force.
The appliance meets the requirements of the directives:
Low Voltage Device (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
The product is marked with CE mark on the nameplate.
Appliance elements
A
1
Motor unit
2
Control panel
3
Anti-slip foot
4
Cord storage compartment
5
Blender jug with level indication
6
Jug handle
7
Jug lid
8
Jug base
9
Lid stopper with level indication
10
Blade unit
11
Sealing ring
12
Grinder
13
Grinder container
14
Grinder sealing ring
15
Grinder base with blade unit
CONTROL PANEL
a
ON/OFF button
b
“–” and “+” buttons
c
“PULSE”
button – enables the user to run the momentary
blending programme at a preset speed
d
“TURBO”
button – enables the user to run the blending
programme at a maximum speed
e
“ICE”
button – enables the user to run the ice-crushing
programme
f
Blade rotation speed indicator
The number of illuminated diodes depends on a blade
rotation speed (the higher the rotation speed, the more
diodes will be on).