23
ASSEMBLY OF THE VACUUM CLEANER TYPE 619
Assemble the vacuum cleaner in reverse order to disassembly. At the same time
observe the below notes and use the catalogue drawing.
Particular attention should be paid to correct connection of the inner wiring in
accordance with the wiring diagram.
On installing all components sealed with rubber gaskets make sure the gaskets
tightly adhere to the mated parts, as it is the precondition for the correct operation of the
vacuum cleaner.
INSTALLING THE CORD REWINDER TYPE 269
Assemble the cord rewinder in reverse order to disassembly. The following sections
include some information related to the installation of individual parts:
when embedding the spring set in the spool an arrow on the rack should overlap
the small projection on the flange of the spool,
make sure that the spring rack is carefully pushed into spool clips,
before installing the embedment of the rings on the body axis, apply a layer of
industrial-grade petroleum jelly to the ring track,
upon winding the cable onto the spool tighten the spring by rotating the spool
fivefold.
NOTES
1.
Any repairs can be carried out only after the device is disconnected from the mains.
2.
Repairs and maintenance should be carried out by a qualified employee, only after
reading the operating manual of the product and this manual.
3.
The heating of the suction assembly during extended periods of use is normal.
Maintenance check is required if the suction assembly warms up too rapidly.
4.
For proper operation of the suction assembly, it must be periodically inspected,
particularly thorough removal of dust from the assembly with particular emphasis on
the commutator and brush plates is required and worn brushes must be replaced.
5.
We do not ship individual parts
6.
We reserve the right to change the shape of the parts to improve the quality and
functionality of the product.