27
GW39-008_v01
Dear Customers!
Congratulations on your choice of our appliance, and
welcome among the users of Zelmer products.
In order to achieve best possible results we recommend
using exclusively original Zelmer accessories. They have
been specially designed for this product.
Please read this instruction manual carefully. Pay special
attention to important safety instructions. Keep this User’s
Guide for future reference.
Important safety instructions
Herewith information concerns your health and safety. It
is obligatory to learn about all instructions for use and
safety information before first usage of the clipper.
The hair clipper is intended for domestic use. In case
●
it is used for commercial use, the guarantee conditions
change.
Connect the power supply adaptor to AC mains supply
●
230 V.
Disconnect the power supply adaptor from the mains
●
supply outlet when not in use or before cleaning.
Do not unplug pulling by the cord.
●
The supplying cord should not hang over the edge of
●
a table or desktop, nor touch hot surface.
If the non-detachable part of the cord is damaged,
it should be replaced by the producer or at a proper
service point or by a qualified person in order to avoid
any hazards.
This device is intended for cutting natural hair, only. It is
●
allowed to use it only for human hair;
it can not be used
for cutting artificial or animal hair
. Using the product
for other than intended purposes shall cause nullifying
the guarantee.
Do not touch the power supply adaptor with wet hands,
●
especially when plugging or unplugging it from the mains
supply outlet.
For the operation with mains use only the adaptor
●
supplied with the hair clipper.
Connect only to easily accessible mains supply outlet.
●
Do not cover the adaptor; it can lead to dangerous
●
temperature increase.
Always At first connect the plug into the socket in the
●
clipper or loading base. When it is done, you can connect
it to the mains supply outlet.
Do not use during bath.
●
Never immerse the device and cord in water or other
●
liquids.
Do not place the hair clipper on wet surface or cloth
●
during operation.
Do not place or store the device in the area where it can
●
fall into water.
Do not use the device with damaged comb attachment.
●
It can cause injuries hazard.
Never try to remove the foreign bodies out of the clipper
●
using sharp objects (i.e. comb).
Always clean after using.
●
This appliance is not intended for use by persons
●
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
●
play with the appliance.
Do not apply not recommended attachments.
●
The hair clipper can be used both as a mains and
●
cordless device.
The cut hair should be clean, dry and combed.
●
Put the towel around the neck to avoid getting the cut
●
hair under the collar.
Use the hair clipper only as intended according to the
●
herewith instructions.
In order to provide additional protection, it is
recommended to install the residual current device
(RCD) with nominal residua Power not exceeding
30 mA. You should contact the professional electrician
in this concern.
Do not use the device near water, over the
bath tube, pool or other water basin.
Observe the above mentioned rules in order to avoid
burning, electric shock or fire hazard.
Make sure you understood the a/m instructions.
Specifications
The product technical parameters are included at the name plate.
The device is built in II class isolation, it does not require
grounding.
ZELMER hair clippers meet the requirements of effective
standards.
The device meets the requirements of the following
directives:
Low Voltage Device (LVD) – 2006/95/EC.
–
Electro- Magnetic Compatibility (EMC) – 2004/108/EC.
–
Noise generated by the appliance: 68 dB/A.
The product is marked with CE symbol on the name plate.
EN
Содержание 39Z017
