Zelmer 177, Руководство пользователя

Страница: 40 / 44

40
Juice extractor assembly
Assemble the bowl on the motor so that the four openings at the bottom fi t the bolts situated in the –
corners of the motor.
Assemble the sieve housing so that the pulp removing opening is situated opposite the bowl
–
discharge.
Press the sieve to the center of the housing and check if is properly installed and if it rotates easily.
–
Assemble the lid so that the protruding part covers the pulp opening.
–
Join the elements by closing the clamps.
–
Lift both clamps and insert the fastenings in the openings of the lid
–
Press the clamps to the housing (you will hear a characteristic click).
–
Place an appropriate utensil under the bowl discharge.
–
Operating the juice extractor
Check if the switch is in the „ – 0 ” position.
Plug in the appliance and switch it on. –
Place the product to be processed into the feeding tube and gently press with the pusher. –
Cleaning the sieve – model 177.T, model 177.TSL
If too much pulp gathers during the extraction, it can cause the appliance to vibrate. In such a case:
Press and hold the „
–
Turbo ” button for 1.5–2 seconds – the motor will operate on high gear which
will help to clean the sieve.
After releasing the „
–
Turbo ” button, place the switch in the „ ON ” position – the motor will return to
normal operation.
The „Turbo” function may be used only in 10 second intervals.
After operation
Switch off the appliance –
Unplug the appliance. –
Dismantle the parts – as in the case of the initial wash. –
Cleaning and maintenance
Wash the juice extractor thoroughly after each use. Do not allow the juice and fruit or vegetable
–
pulp to dry.
Wipe the housing with a damp cloth with dishwashing liquid.
–