ZEITRAUM GmbH · Äußere Münchner Str.2 · D-82515 Wolfratshausen · Tel +49 (0)8171 - 418130 · Fax +49 (0)8171 - 418141 · [email protected] · www.zeitraum-moebel.de
1. Screw both base plates together with the central bar. The red tag on the bottom
side of the smaller base plate has to be at the same place as the red tag on the
upper side of the bigger base plate.
2. Screw the round head- plate together with the table leg.
3. Screw the complete table leg together with the wooden table top.
For screwing the metal foot use only the high- strenght screws supplied and the screw
lock!
Apply glue on the screw thread as well as on the conical surfaces of the screws.
Tighten the screws hand-tight and check for smooth seat. Then tighten the screws.
Screw tightening torque 70 Nm recommended.
Suit with ratchet and nut recommended.
The screw lock is hardened after 12h.
Warning: Use of canted allen wrenches or cordless screwdrivers
does not bring enough torque!
Order of assembling
KONTRA
Assembly Instructions 12/ 2013
Arrangement baseplates / table top
square:
round:
amourphous:
1.
2.
3.
