Zeiss S100, Инструкция по эксплуатации

Страница: 153 / 278

Version 9.0
G-30-1781-en
Page 153
S100 / OPMI pico Operation
You can select under "AUDIO CONFIRMATION" if there is to be an acoustic
feedback (signal tone) when pressing the foot switch.
– Enabled
Acoustic feedback is activated.
– Disabled
Acoustic feedback is deactivated.
FACTORY SETTINGS
In this submenu, the user and camera settings can be reset to the factory
settings. To do this, proceed as follows:
• Select the "FACTORY SETTINGS" line in the "SERVICE MENU" using the
control keys
and press the <enter> key.
• Using the control keys, select between:
– RESET USER 1
– RESET ALL USERS
– RESET CAMERA

After selecting one of the menu items, a message is displayed
indicating that the saved data will be overwritten.
• Press the <Enter> key to overwrite the settings.

The system returns to the service menu after approx. 2 seconds.
• If you do not want to save any changes, return to the "SERVICE MENU"
via the "CANCEL" menu item.
VERSION INFORMATION This submenu displays the current version of the hardware and software
components and the serial number of the camera and the control unit.
Proceed as follows:
• Select the menu item "VERSION INFORMATION" and press the <enter>
key. The following information is displayed:
– SOFTWARE (software version of the control unit)
– S/N CCU (serial number of the control unit)
• Press the <Enter> key to return to the "SERVICE MENU".