Capture
44
To take quick and easy photographs select from menu . Advanced users
can specifically set all the camera parameters individually using the system settings in the
various menus.
After correct diopter adjustment (cf. Preparation), point the PhotoScope towards the
desired object and focus the images using the focus function (Fig. 1/2) on the spotting
scope. Alternatively, of course, adjustment may be carried out directly on a sharp monitor
image, for which an enlarged representation on the monitor image can be selected using
the zoom plus button on the remote control.
If the FOCUS ASSIST function is activated, the camera will automatically compensate
for slight focusing errors. Otherwise, press the PUSH AF button on the remote control
once to activate automatic focusing for the next exposure. This is indicated by a blue spot
(Fig. 3/13) on the top left of the monitor image. The image detail can be selected using
the zoom ring (Fig. 1/3).
The rectangular markings in the viewfinder show the image detail captured. A live preview
of the image is shown on the monitor at the same time (DISPLAY OFF not activated).
Important note:
A strong incidence of light through the eyepiece can result in undesired reflections on
the image. Therefore, please place the protective cap over the eyepiece where possible
or keep the head close behind the eyepiece during exposure.
1
AUTO