Menu settings
31
FOCUS ASSIST
With FOCUS ASSIST switched on, the image is refocused on release in order to correct
slight manual focusing errors. This function serves not as a substitute but rather as an aid
to manual focusing.
The location of the measuring field can be specified (CENTER or VARIABLE). To place the
measuring field away from the centre, select the VARIABLE setting. After pressing the SET
button (Fig. 2/8) on the remote control, use the SCROLL buttons to move the measuring
field. The measuring field border frame is shown in blue. Press the SET button again to fix
the measuring field and the frame color returns to red.
If FOCUS ASSIST is switched off, this function can be activated for the next exposure by
means of the PUSH AF button on the remote control. FOCUS ASSIST focuses once when
the button is pushed (blue spot appears on the monitor) and is deactivated again after
capture. Hold the PUSH AF button depressed for longer to switch off the function with
no subsequent capture. If FOCUS ASSIST is switched off, the frame (Fig. 3/6) is shown
in grey.
Note:
Correction of the image definition by the FOCUS ASSIST function affects only the image
captured or the image on the monitor. No change can be seen in the visual observation
eyepiece.