Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 158 / 268

Preparations for use S7 / OPMI PROergo
Version 11.0
Page 158 G-30-1435-en
Cable connections for the 1Chip HD camera
Consult the Instructions for Use for the "1Chip HD Camera" (G-30-1946) for
details of the required cable connections.
You can find a list of the video accessories available for use with your surgical
microscope in the section "video accessories for the 1Chip HD camera option"
on Page 247.
CAUTION Risk of electric shock caused by unapproved or defective accessories!
Unapproved or defective accessories can cause increased leakage current!
• When setting up your system, be sure to comply with the requirements
of IEC 60601-1, section 16 (in some countries IEC 60601-1-1 may still be
valid).
• Comply with the Medical Device Operator Ordinance or other national
laws.
CAUTION Risk of tripping over cables lying on the floor!
R507
If cables are installed inappropriately on the floor, this presents an increased
tripping hazard and interferes with the flow of work. By tripping and falling
down, users may suffer tissue trauma.
•
If possible, cables should only be laid outside of the area of movement.
CCU
DVI
DC 12V - 15V
from the
suspension
system
1Chip HD camera on the beam splitter, Splitter 20
S-Video HD SDI
Camera cable
permanently installed
in suspension system
(max. 5m)
HD SDI
video recorder
video monitor
video recorder
video monitor
video recorder
video monitor
video recorder
video monitor